How to Sponge Paint with 3 Colors (Best Solution)




How to Sponge Paint with 3 Colors


As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

How to Sponge Paint with 3 Colors? Sea sponges are decorative paint tools that create depth and movement. You can use the sponge on furniture, accessories, picture frames, walls, and other surfaces.

The final design will look different depending on the colors you choose and how you apply them. You should choose one color for your faux finish project if you use three colors.

These colors will be usually the lightest, such as soft cream. The two other colors should complement one another, such as colors from the same family, such as pale green and medium green.

How to Sponge Paint with 3 Colors

These Are The Tips On How to Sponge Paint with 3 Colors.

1. Paint the Base Coat

  • Use a paint roller to cover the wall in the color you choose. This shade will show at least once it’s covered with other glazes, so pick a paint color that doesn’t overpower.

2. Sponging the Second Color

  • After the base coat has dried, mix equal parts polish with topcoat.
  • Use a sponge to cover areas that you don’t want to clean.
  • Use a large sponge from the sea to soak up the frosting. Drain it and then dip it in it. Use the sponge to slice into the wall’s upper left corner.
  • Keep rubbing it against the wall in an irregular pattern, starting at the corner and working your way up. It should be thick and texture, but not drip.
  • It is important to still see the base coat color.

3. Sponging the Third Colour

  • The sponge can be dyed in a third color after it dries to create a more detailed treatment such as the rusty-steel look.


What is the best method to sponge paint?

To show sponge footprints, turn your hand in various directions. Allow the paint to dry. Use 1 part of paint to mix the third color and frosting in a separate bucket

Four parts frosting. Use a sponge to dip in the third color. Wipe off any excess paint with a towel or paper plate.

What is the difference between sponge painting and marbling?

This technique has a consistent, uniform finish. You can still use sponge painting to create a base for marbling. This is a simple method of sponge painting that uses your base color and enamel color. The three colors you have are medium, low, and high tones.

Is there a better way to paint with a sponge?

1 Semi-gloss and satin paints have a longer time to work with enamel than eggshell or matte paints. 2 Place the paint in a tray. 3. Cover the sponge paint roller with a 9-inch sponge and a 3/8 inch lint. Allow the base coat to dry for 24 hours.

How long does sponge paint dry?

Semi-gloss and satin paints can be used for enameling longer than eggshell or matte paints. Place the paint in a tray. Cover the sponge paint roller with a 9-inch scraper and a 3/8-inch fluff. Allow the base coat to dry for 24 hours. Mix the enamel with one part paint and four parts enamel.

How do you sponge with multiple colors?

The base coat is applied first. Then, you apply the base coat of color. Use a sponge with a different color to show the underlying color you can also read the rest of this article.

Steps to Sponge Paint Your Wall With Multiple Colors

  1. Prep the base coat and paint it. Paint the Base Coat and Prep.
  2. Add Glaze or Extend to Paint. Add Glaze and Extender to Paint.
  3. Use a sponge to apply the First Color. Apply the First Color with a Sponge
  4. Now apply the rest of the colors.

How do you color a room with 3 colors?

How can I coordinate 3 paint colors in a room?

  1. For foolproof coordination, select all three colors from either the “warm” or “cool” color wheel.
  2. The ceiling should be painted with the lightest of the three colors.
  3. Use the darkest color to paint accent walls.
  4. The medium-toned paint can be used to cover the walls.

What kind of paint do you use for sponge painting?

Paints in flat or eggshells are suitable for most rooms, but if you have a lot of traffic or expect to be washing the walls often, semi-gloss or satin paints may be better. Apply a second coat to ensure complete coverage.


In conclusion, sponge painting is a great way to add color and interest to any room. With just a few simple supplies, you can transform a boring wall into a work of art. When sponge painting, be sure to use three colors that complement each other. Start with the lightest color and work your way up to the darkest. Use a variety of strokes for the best effect. Have fun and be creative!

About the author

Leave a Reply

Latest Posts

  • Fuji Spray Mini Mite 3 Platinum Review

    Fuji Spray Mini Mite 3 Platinum Review

    Introduction The Fuji Spray Mini Mite 3 Platinum is a versatile and powerful paint sprayer that has gained popularity among DIY enthusiasts and professionals alike. This review will provide an in-depth analysis of its features, performance, and overall value for money. Features The Mini Mite 3 Platinum is equipped with a 3-stage turbine motor, which…

    Read more

  • Transforming Vintage Furniture with Spray Painting

    Transforming Vintage Furniture with Spray Painting

    Are you looking to give your vintage furniture a fresh new look? Look no further than spray painting! This versatile and convenient technique can breathe new life into your old pieces, allowing you to create a unique and stylish space. In this blog post, we will guide you through the process of spray painting vintage…

    Read more

  • Devilbiss Finishline 4 FLG-670 HVLP Spray Gun Review

    The Devilbiss Finishline 4 FLG-670 HVLP Spray Gun is a high-quality spray gun designed for professional painters and DIY enthusiasts alike. With its advanced HVLP (High Volume Low Pressure) technology, this spray gun delivers superior performance and precision in every spray. Key Features Let’s take a closer look at some of the key features that…

    Read more